Lo-Chlor Maxi-Floc Plus is a heavy duty liquid flocculant formulated to clear even the cloudiest pools by binding fine particles together so they can settle to the bottom for easy removal. Designed to work quickly on dust, dirt, dead algae, and other floating particles, this liquid floc restores sparkling water clarity. Lo-Chlor Maxi-Floc Plus is trusted by professionals as a reliable solution for problem pools that require fast results and a successful floc treatment. Superchlorination is recommended before using Lo-Chlor Maxi-Floc Plus to ensure optimal results.
Heavy duty liquid flocculant – Rapidly clears murky and cloudy pool water.
Fast acting formula – Causes fine floating particles and organic matter to coagulate and settle debris to the pool floor.
Effective against dead algae – Quickly removes stubborn water haze after algae treatment.
No messy residue – Leaves clean water without sticky or cloudy after-effects.
Compatible with all pools – Safe for fibreglass, vinyl, painted, and concrete pools.
Improves filter efficiency – Reduces load on the pool filter by settling contaminants directly.
Easy to use – Liquid dosing ensures simple application and reliable results.
Available in multiple sizes including Maxi-Floc Plus 1L.
Specifications
Feature
Details
Product Type
Pool and Spa Chemical – Liquid Flocculant
Brand
Lo-Chlor
Model
Maxi-Floc Plus
SKU
Varies (1 Litre and 5 Litre packs available)
Active Function
Causes fine particles to coagulate and drop to pool floor
Application
Add directly to pool water with pump and filter off
Dosage
Typical: 200 mL per 10,000 litres (refer to label for heavy clouding)
Compatibility
Suitable for all pool types and sanitiser systems
Sizes Available
1 Litre, 5 Litre containers
Application Instructions
Adjust pH of the pool water to recommended levels before treatment.
Turn off the pump and remove filter grids prior to dosing if required for your filtration system.
Add the correct dosage of Lo-Chlor Maxi-Floc Plus evenly across the pool.
Leave the water undisturbed for 3 to 6 hours to allow particles to coagulate and settle debris on the pool floor.
Vacuum the settled material directly to waste for a successful floc.
Refit filter grids if removed and resume normal filtration.
Important Notes
Do not swim until the floc has fully settled and the pool has been vacuumed.
Always vacuum to waste to avoid clogging the pool filter.
Works best when applied overnight or when the pool is not in use.
Treats dead algae and cloudy water without leaving a messy residue.
Lo-Chlor Maxi-Floc Plus is safe for all sanitiser systems when used according to directions. However, if the TDS reading is above 1500ppm, Lo-Chlor Maxi-Floc Plus will not work effectively.
Frequently asked questions
Our FAQ area is the best place to look to find answers to your questions. Our community and support team constantly updates the questions and answers.
It is a liquid floc combined treatment that clears the cloudiest pools by binding fine particles and dead algae, then dropping them to the floor for removal.
The formula causes small floating particles and organic matter to coagulate into larger clumps, which then sink to the bottom and can be vacuumed away.
Yes, it is recommended to remove filter grids prior to application in some filtration systems to ensure proper settling and avoid clogging. Additionally, Lo-Chlor Maxi Floc Plus should not be used with a filtration system as the filter may clog.
Yes. It is safe for fibreglass, vinyl, painted, and concrete pools, and compatible with all sanitisers.
No. Unlike some flocculants, Lo-Chlor Maxi-Floc Plus does not leave a messy residue and helps restore clean, clear water.
It is best used after storms, heavy pool use, or after treating algae when water remains cloudy.
